With the growing global demand for intelligence, intelligent applications are also facing increasingly demanding practical environments, and drones also need the popularization of intelligence, which requires more suitable materials and more efficient molding. Way.  OPPEEK has a relatively early-mover advantage in the drone composite industry. It has developed suitable thermoplastic carbon fiber composite materials to gradually replace some components to improve the working efficiency of drones. All-in-one drone Advantages of thermoplastic composites It has excellent toughness and impact resistance, high strength, can cope with unexpected situations, and is resistant to falling, thereby reducing possible losses. It has strong corrosion resistance and good heat resistance, and can cope with diverse working environments. Lightweight and structural weight reduction, the freed up weight can ensure longer battery life. The molding cycle is short, production efficiency is high, costs are saved in warehousing, molding, etc. It is highly designable and can meet customized needs. Recyclable, this is the inherent advantage of thermoplastic composite materials, which is in line with the global strategy of reducing carbon emissions and effectively reduces costs.

PEEK can be used for gear processing, and has its own advantages compared to metal, ordinary POM, and nylon: 1. Reduce noise, low density, light weight; 2. The moment of inertia decreases; 3. Excellent chemical corrosion resistance; 4. Excellent resistance to grease and automobile fuel; 5. Low hygroscopicity, no swelling, and weakened strength; 6. High wear resistance and longer service life; 7. Better technology for combining with metal and other plastics; 8. Injection molding can be used to reduce costs. PEEK material has excellent comprehensive functions among high-functional polymers that cannot be matched by other general-purpose plastics. It has excellent functions suitable for various harsh environments and has been successfully widely used in various industries such as aerospace, automobiles, electronic semiconductors, electromechanical and so on. Comparison of needs demanding occasions. It is a material used by users to develop new products and improve product service life and reliability.

  PEEK has outstanding high-temperature thermal resistance. It can be used for a long time at 250°C, and the instantaneous use temperature can reach 300°C. It has high rigidity, dimensional stability, and a small linear expansion coefficient, which is close to that of metal aluminum. The chemical stability of PEEK materials Good, it has strong corrosion resistance to acids, alkalis and almost all organic solvents, and has flame retardant, radiation resistance and other properties; PEEK has excellent resistance to sliding wear and fretting wear, especially at 250℃ Maintains high wear resistance and low friction factor; in addition, PEEK material is easy to extrusion and injection molding.  Therefore, PEEK is widely used in aerospace, medical, semiconductor, pharmaceutical, food processing and other industries.

There are two types of PEEK pipes: modified and pure PEEK. The Chinese name is polyether ether ketone pipe. PEEK pipe not only has better heat resistance than other high-temperature resistant plastics, but also has high strength, high modulus, high fracture toughness and excellent dimensional stability. sex. PEEK pipes made of high-performance PEEK material are widely used in a variety of different industries, especially the oil and gas industry and the semiconductor industry. PEEK is often the material of choice due to its comprehensive requirements such as operating temperature, chemical resistance, creep resistance, thermal stability and compression resistance. Currently, there are three main colors of PEEK tubes developed on the market. These three colors are also the colors of PEEK tubes we often see. 1. The first PEEK-1000 tube (natural color) PEEK-1000 is made of pure polyetheretherketone resin, which has the best toughness and impact resistance among all PEEK grades. PEEK-1000 can be sterilized using more convenient sterilization methods (steam, dry heat, ethanol and Y-rays), and the raw material ingredients used to make PEEK-1000 comply with the EU and US FDA regulations on food safety. These features make it suitable for medical use , pharmaceutical and food processing industries are very commonly used.   2. The second type of PEEK-C1030 tube (black) The material is filled with 30% carbon fiber reinforcement and has better mechanical properties (higher elastic modulus, mechanical strength and creep) and more wear resistance. Moreover, carbon fiber reinforced plastic has 3.5 times the strength of unreinforced PEEK plastic. Thermal conductivity - dissipates heat from bearing surfaces more quickly.   Third, the third type of PEEK-G1030 tube (brown gray) This material is a reinforced plastic filled with 30% glass fiber. It has better rigidity and creep resistance than PEEK-1000, as well as better dimensional stability. It is ideal for manufacturing structural parts. Can withstand fixed loads at high temperatures for a long time.

In order to adapt to various industrial environments and meet the working needs of harsh conditions, the first thing we think of is polyetheretherketone, or PEEK for short.   As an engineering plastic with excellent performance, polyetheretherketone has many outstanding properties with other materials. We come into contact with it more in life. It should be because it has a unique high temperature resistance of 260°C and is relatively stable. , including:   1. The shrinkage rate of materials injection molded with PEEK raw materials is relatively small, which helps us to have more precise control over the size of the finished material, and the accuracy will be more accurate than that of other materials.   2. PEEK material has high stability. For engineering plastic products, we are required to be more stable when using them. This is because we are mainly polymer molecules. After the activation performance is improved, the chain segments will curl up, which is caused in our lives. There is still quite a lot of use.   3. PEEK has extremely strong thermal hydrolysis resistance, which allows us to have low water absorption in high temperature and high humidity environments, so it is quite stable during use.   4. PEEK is self-extinguishing, so it can reach UL standard 94V-0 without adding any flame retardant.

The hardness of PEEK material depends on whether it is pure material or added with glass fiber or other additives. Generally, the Shore D of pure PEEK material is generally 88, the PEEK material reinforced with glass fiber is generally Shore D89, and the PEEK reinforced with carbon fiber is generally Shore D89. The material is generally Shaw D91. However, different degrees of crystallinity will also result in different hardness. PEEK (polyetheretherketone) material is a special engineering plastic with excellent performance. Compared with other special engineering plastics, it has many significant advantages, including high temperature resistance, excellent mechanical properties, good self-lubricating, chemical corrosion resistance, and flame retardancy. , peeling resistance, radiation resistance, stable insulation, hydrolysis resistance and easy processing, etc.

PEEK board, whose Chinese name is polyetheretherketone board, is a new type of engineering plastic board extruded from PEEK raw materials. PEEK board has good toughness and rigidity. It has excellent fatigue resistance and maintains good toughness and material stability at high temperatures. PEEK board can maintain extremely high wear resistance and extremely low friction coefficient at 260°C. PEEK resin is easy to extrusion and injection molding, has excellent processing performance and high molding efficiency. In addition, PEEK also has excellent properties such as good self-lubrication, easy processing, stable insulation, and hydrolysis resistance. PEEK board has excellent comprehensive properties, good mechanical properties, high temperature resistance, and superior chemical resistance, making it a more versatile high-end Engineering plastics. With these excellent comprehensive properties, parts processed from PEEK sheets are widely used in automotive connectors, heat exchange parts, valve bushings, deep-sea oil field parts, and in machinery, petroleum, chemical industry, nuclear power, rail transit, electronics and medicine, etc. It has a wide range of applications in various fields. The thickness range of PEEK sheets produced by OPPEEK is between 1-150mm, and can also be customized according to customer requirements. Our company has the production capacity to produce PEEK sheets of different specifications and sizes. The PEEK sheets produced by our company have a smooth surface without black spots, good toughness and easy processing, favorable prices, and excellent performance. After quality inspection by a third-party organization, they can completely replace imported PEEK sheets. Customers are welcome to inquire and purchase.  

In order to improve the production and processing capabilities of large-sized products and complex special-shaped parts, our company purchased a large-scale gantry engraving and milling machine, which can process large parts with a length of 1500mm, a width of 1000mm, and a height of 600mm. It has the outstanding characteristics of high precision and high efficiency.

PEEK sheet, whose Chinese name is polyetheretherketone sheet, is a new type of engineering plastic sheet extruded from PEEK raw materials. PEEK board has good toughness and rigidity. It has excellent fatigue resistance and maintains good toughness and material stability at high temperatures. With these excellent comprehensive properties, parts processed from PEEK sheets are widely used in automotive connectors, heat exchange parts, valve bushings, deep-sea oil field parts, and in machinery, petroleum, chemical industry, nuclear power, rail transit, electronics and medicine, etc. It has a wide range of applications in various fields. Main features of PEEK sheets: 1. High temperature resistance, long-term use temperature exceeds 250℃; 2. Corrosion resistance, excellent corrosion resistance 3. Wear resistance, excellent wear resistance; 4. Lubrication-free, lubrication-free characteristics under high speed and high pressure; 5. Resistant to hydrolysis and high temperature steam; 6. Creep resistance, excellent creep resistance; 7. Flame retardancy;

With the steady progress of the economy and the diversified development of social applications, major companies are seeking higher-performance materials due to the disadvantages of non-lightweight and slow molding of metal and thermosetting composite materials. Customizable, high-performance thermoplastic prepreg.OPPEEK's continuous fiber reinforced thermoplastic composites (CFRTP) effectively combine the light weight, high strength of fibers and the wide application scenarios of thermoplastic resins.The fibers of Hengbo composite materials are mainly carbon fiber, while the thermoplastic resins mainly include polyether ether ketone (PEEK), polyphenylene sulfide (PPS), and polycarbonate (PC). We can also customize it according to the customer's requirements. This demand provides composite solutions for other fibers and thermoplastic resins, fibers such as glass fiber, basalt fiber, etc., and resins such as PSU, PA6, PET, etc. Provide customers with comprehensive solutions from material design, selection, customization, and batch supply.

Founded in the 1960s, the JEC Composite Materials Exhibition is the oldest composite materials exhibition in Europe and even the world. In 2023, the first year after the epidemic was reopened, nearly 1,000 global companies were attracted to participate in this JEC exhibition. As a relatively outstanding manufacturer of high-performance thermoplastic composite materials in China, OPPEEK also participated in this JEC exhibition and has gained a certain reputation internationally. Domestic and foreign customers are full of praise for the appearance and types of OPPEEK's products. After testing the samples they subsequently obtained from our company, they also said that their performance is not inferior to that of other internationally renowned manufacturers. From left to right are Humber Composites’ T800-PEEK, T700-PPS, and T300-PC prepregs.